Avid VENUE SC48 Remote System

Details Rankings Comparisons Alternatives Related

Compare with other Mixers
Compare

Mixers

	General
Brand	Avid Venue	9.8% Mixers have Avid VENUE
Manufacturer Part Number	9935-65028-00
Mixers Type	Digital Mixers	20.4% Mixers have Digital Mixers

	Specifications
Effects	No	47.1% Mixers don't have Effects
Rackmountable	No	56.1% Mixers don't have Rackmountable
Faders	26 Touch-sensitive, Motorized Faders	0.5% Mixers have 26 touch-sensitive motorized faders
Channels	48	17.37
Computer Connectivity	5 X Usb, 2 X Firewire (for Pro Tools Only)	0.5% Mixers have 5 x USB 2 x FireWire (for Pro Tools only)
EQ Bands	Dsp Graphic Eq
Aux Sends	Configurable In Software
Busses/Groups	Configurable In Software	0.5% Mixers have Configurable in software
Phantom Power	+48v (individually Switchable Per Channel Via Software), 10ma Max, +15v @ 6ma (switchable), 48 X 48v
Inputs - Mic Preamps	48	26.00
Inputs - Line	16 X Trs
Channel Inserts	No Channel Inserts	32.4% Mixers have No Channel Inserts
Outputs - Main	16 X Xlr
Inputs - Other	2 X 1/4" Trs
Outputs - Direct	16 X Xlr
Outputs - Other	2 X 1/4" Trs
Send/Return I/O	Configurable In Software
Headphones	1 X 1/4" Trs	0.6% Mixers have 1 x 1/4" TRS
Talkback	Yes	31.7% Mixers have Talkback
Outputs - Digital	1 X Aes/ebu (xlr)
Data I/O	Ethernet
Transport Controls	No Transport Controls
DAW Control	Yes (pro Tools)
Inputs - Digital	1 X Aes/ebu (xlr)
I/O Expansion Slots	1 X Slots Available
Input impedance	Pad Off: 5.5k Ohm, Leg To Ground, Pad On: 3.8k Ohm, Leg To Ground, 4k Ohms, 10k Ohms
Power Requirements	100-240 V, 50-60hz, 200 W
Frequency Response	+/-0.2db (22hz - 20khz Bw, Relative To 1khz)
Output Impedance	50 Ohm, Leg To Ground, 50 Ohms
ECx Ethernet Control	Rj-45 (for Ecx Remote Control)
Connector (1)	1/4-inch Trs, Unbalanced
Console Light Connectors (2)	XLR3-F
Maximum RMS Power Output (at +21 dBu)	106mw (with 32-ohm Headphones) 130mw (with 600-ohm Headphones)
Internal Sample Frequency	48 kHz
External Sample Frequency	48khz +/-10 Ppm (word Clock Input)
26 touch-sensitive, motorized faders	16 Input, 8 Output Master, 1 Flex Channel, And 1 Mains
Processing Delay	Less Than 2.3 Ms (48 Channels, Stage Input Through L-r Bus To Stage Output)
Internal Processing	Up To 48-bit, Fixed Point (288db Internal Dynamic Range)
Sensitivity	-2dbu To -32dbu (variable In 6 Gain Steps)
Crosstalk	-100db Typ (adjacent Stage Inputs To L-r Bus, @ 1khz)
Pad	20 dB
Residual Output Noise	-90dbu Typ (20hz - 20khz Bw)
Connector	Xlr3-f, 1/4-inch Trs, Xlr3-m
USB Ports (5)	USB 2.0
Connector (x16)	Xlr3-f, Balanced, Xlr3-m, Balanced
EIN	-126dbu Typ (maximum Gain, 150 Ohm Source, 20hz - 20khz Bw, Unweighted)
IEEE-1394 Port	Firewire (for Pro Tools Le Only)
Maximum input level	+32dbu With Pad, +24 Dbu
A/D Converter	24-bit, Delta Sigma
GPI Port	Db9 Female
Maximum Output Level	+24dbu, +24 Dbu
Sample Rate	48 kHz
Footswitch Connectors (2)	1/4-inch Trs
D/A Converter	24-bit, Delta Sigma, 128x Oversampling
Gain	+10db To +60db
MIDI In/Out	5-pin Din Female
Word Length	24 bit
Dynamic range	108db Typ
Word Clock I/O	Bnc Female
Sample Rate Conversion	3:1 Ratio
Format	AES/EBU
VGA Port	Db-15 Mini-female (1024 X 768 Resolution, Mirrored Display Mode)
Dithering	None
DVI Port	Dvi Female (1024 X 768 Resolution, Mirrored Display Mode)
Channel Status Info	Pro, Audio 48k, No Emphasis
	Dimensions
Width	38.95 "	4.90 "
Depth	28.15 "	16.05 "
Height	7.3 "	4.93 "
Weight	125 Lbs. (56.7 Kg), 125 Lbs.
Maximum Depth	28.15 Inches (715 Mm)
Maximum Height (front)	3.9 Inches (100 Mm)
Maximum Height (rear)	7.3 Inches (186 Mm)
Maximum Width	38.95 Inches (989 Mm) With Endcaps