Avid VENUE SC48 Remote System vs Midas PRO2 (Install Pack)

Add

Compare:

Avid VENUE SC48 Remote System	VS	Midas PRO2 (Install Pack)

Overview:

There are 73 differences and 5 similarities between Avid VENUE SC48 Remote System, Midas PRO2 (Install Pack)

General
Brand
Avid Venue	Midas
Manufacturer Part Number
9935-65028-00	Pro2/ip
Mixers Type
Digital Mixers	Digital Mixers

Specifications
Effects
No	Yes
Rackmountable
No	No
Faders
26 Touch-sensitive, Motorized Faders	28 X 100mm Throw
Channels
48	56
Computer Connectivity
5 X Usb, 2 X Firewire (for Pro Tools Only)	2 X Usb
EQ Bands
Dsp Graphic Eq	4-band Parametric
Aux Sends
Configurable In Software
Busses/Groups
Configurable In Software	27 Bus
Phantom Power
+48v (individually Switchable Per Channel Via Software), 10ma Max, +15v @ 6ma (switchable), 48 X 48v	56
Inputs - Mic Preamps
48	8 X Xlr (mic/line)
Inputs - Line
16 X Trs	8 X Xlr (mic/line)
Channel Inserts
No Channel Inserts	Yes
Outputs - Main
16 X Xlr	32 X Xlr, Etc.
Inputs - Other
2 X 1/4" Trs	8 X Aux Returns
Outputs - Direct
16 X Xlr
Outputs - Other
2 X 1/4" Trs
Send/Return I/O
Configurable In Software
Headphones
1 X 1/4" Trs
Talkback
Yes	Yes
Outputs - Digital
1 X Aes/ebu (xlr)	3 X Aes3
Data I/O
Ethernet	Ethernet
Transport Controls
No Transport Controls	No
DAW Control
Yes (pro Tools)	No
Inputs - Digital
1 X Aes/ebu (xlr)	2 Aes3
I/O Expansion Slots
1 X Slots Available
Expandable with optional external hardware I/O units (max capacity
	156 Inputs X 166 Outputs)
Input impedance
Pad Off: 5.5k Ohm, Leg To Ground, Pad On: 3.8k Ohm, Leg To Ground, 4k Ohms, 10k Ohms
Power Requirements
100-240 V, 50-60hz, 200 W
Frequency Response
+/-0.2db (22hz - 20khz Bw, Relative To 1khz)
Output Impedance
50 Ohm, Leg To Ground, 50 Ohms
Stage I/O
	Dl251 48 In / 16 Out Fixed Configuration
ECx Ethernet Control
Rj-45 (for Ecx Remote Control)
Connector (1)
1/4-inch Trs, Unbalanced
Console Light Connectors (2)
Xlr3-f
Maximum RMS Power Output (at +21 dBu)
106mw (with 32-ohm Headphones) 130mw (with 600-ohm Headphones)
Internal Sample Frequency
48 kHz
External Sample Frequency
48khz +/-10 Ppm (word Clock Input)
26 touch-sensitive, motorized faders
16 Input, 8 Output Master, 1 Flex Channel, And 1 Mains
Processing Delay
Less Than 2.3 Ms (48 Channels, Stage Input Through L-r Bus To Stage Output)
Internal Processing
Up To 48-bit, Fixed Point (288db Internal Dynamic Range)
Sensitivity
-2dbu To -32dbu (variable In 6 Gain Steps)
Crosstalk
-100db Typ (adjacent Stage Inputs To L-r Bus, @ 1khz)
Pad
20 dB
Residual Output Noise
-90dbu Typ (20hz - 20khz Bw)
Connector
Xlr3-f, 1/4-inch Trs, Xlr3-m
USB Ports (5)
Usb 2.0
Connector (x16)
Xlr3-f, Balanced, Xlr3-m, Balanced
EIN
-126dbu Typ (maximum Gain, 150 Ohm Source, 20hz - 20khz Bw, Unweighted)
IEEE-1394 Port
Firewire (for Pro Tools Le Only)
Maximum input level
+32dbu With Pad, +24 Dbu
A/D Converter
24-bit, Delta Sigma
GPI Port
Db9 Female
Maximum Output Level
+24dbu, +24 Dbu
Sample Rate
48 kHz
Footswitch Connectors (2)
1/4-inch Trs
D/A Converter
24-bit, Delta Sigma, 128x Oversampling
Gain
+10db To +60db
MIDI In/Out
5-pin Din Female
Word Length
24 bit
Dynamic range
108db Typ
Word Clock I/O
Bnc Female
Sample Rate Conversion
3:1 Ratio
Format
Aes/ebu
VGA Port
Db-15 Mini-female (1024 X 768 Resolution, Mirrored Display Mode)
Dithering
None
DVI Port
Dvi Female (1024 X 768 Resolution, Mirrored Display Mode)
Channel Status Info
Pro, Audio 48k, No Emphasis
Dimensions
Width
38.95 "	46.44 "
Depth
28.15 "	27.75 "
Height
7.3 "
Weight
125 Lbs. (56.7 Kg), 125 Lbs.	101.4 Lbs.
Maximum Depth
28.15 Inches (715 Mm)
Maximum Height (front)
3.9 Inches (100 Mm)
Maximum Height (rear)
7.3 Inches (186 Mm)
Maximum Width
38.95 Inches (989 Mm) With Endcaps